What are the specifications of solar street lights when purchasing?

Material is also an important criterion for choosing a solar street light supplier, which will directly affect the service life of the street lights in the later stage. Now the more common ones are the light poles made of Q235 steel. The surface of this material is often processed. enhance its performance. Such as hot-dip galvanizing or cold-galvanizing, relatively speaking, the anti-corrosion performance of the lamp post treated by hot-dip galvanizing is better, so it is recommended to choose the lamp pole treated in this way when purchasing.

1. The solar street light should be carried out according to the standard design documents. If the design needs to be modified, it should be approved by the original design unit.

2. After winning the bid or signing the contract, the construction unit should carefully review the drawings, fully understand the design intention, and prepare the construction organization design (or plan) according to the

characteristics of the project.

3. Formulate corresponding environmental protection measures and safety technical measures in line with national and local regulations and technical documents.

4. The equipment and materials required in the project shall comply with the relevant current national standards. The test report should be complete, and the specifications, models and appearance quality should meet the design requirements.

5. The testing instruments and meters used in the construction must be verified and within the validity period.

6. The construction unit should have the corresponding qualifications, and the construction personnel should be trained and qualified and certified to work.

Generally speaking, the pole heights of solar street lights are 4 meters, 5 meters, 6 meters, 7 meters, 8 meters, 9 meters, 10 meters, 11 meters, 12 meters, etc. When choosing, don't be sloppy, it should be based on the road surface. The width determines the height. For example, the height of a single-sided street light ≥ the width of the road, the height of a double-sided symmetric street light = the general width of the road, and the height of the double-sided zigzag street light is at least 70% of the width of the road, so as to bring the best lighting effect .

Author: Yufai
This article was adapted from its original source: