Yufai: How to maintain Solar powered street lamp?

With the rapid development of new solar energy technology, solar powered street lamps are used more and more widely, especially in rural areas and areas where electricity is scarce. So how to maintain the Solar powered street lamp? Next, Yuhui Aurora will tell you how to maintain the Solar powered street lamp.

1. Cleaning of Solar powered street lamp solar panels

Since the solar energy is placed outdoors, after wind, rain, and snow, the solar panels will have dust or other dirt. We need to check the solar panels for foreign matter immediately to ensure that the solar panels are complete, tidy and well received. Otherwise, it will affect the subsequent normal acceptance of solar light, and then affect the lighting time of street lights. We need to keep it clean every day. We can wipe it lightly with clean gauze water instead of washing with hard substances or corrosive solvents.

2. Maintenance of Solar powered street lamp battery

The maintenance of the solar battery is mainly to ensure that its charging and discharging are normal. You can refer to the working status of the Solar powered street lamp controller for preliminary judgment. At the same time, you can check the battery charging and discharging power level. At the same time, it is strictly forbidden to adjust the Solar powered street without authorization. The working state of the lamp controller can avoid overshoot and overdischarge of the battery.

3. Maintenance of solar street light controller

The inspection and maintenance of the Solar powered street lamp controller affects the lighting time and brightness changes of the system. Because the components of the Solar powered street lamp system have different lifespans, the battery and solar street light controllers control the brightness and lighting time. If you find that the lighting time of the street lamp is not enough, you should check the battery power first, and check the Solar powered street at the same time. For lamp controllers, each manufacturer’s controller has instructions, and is generally equipped with a working status indicator. Based on this, it can be preliminarily judged whether the Solar powered street lamp system is working normally.

Author: Yufai
This article was adapted from its original source: